PLIERS

DROP FORGED PLIERS

The most used tools in the Fence Industry. Made exclusively for fencing needs unconditionally guaranteed. Available with a round nose or square nose in an 8" or 10". Also available with a 24 karat gold plating for special gifts.

CODE#	ITEM	EACH
T10	10"ROUND PLIERS
T12	10" ROUND (VINYL HANDLE)
T15	10" SQUARE PLIERS
T30	8" ROUND PLIERS
T35	8" SQUARE PLIERS

24 CARATS GOLD PLATED PLIERS (CERTIFICATE ON REQUEST)

BEST GIFT FOR A STAFF OR WORKER. TO SHOW THAT YOU CARE…

GOLD10

24 Karat Gold Plated PLIER.

10" ALLIGATOR JAW PLIER

10" Alligator Jaw - vinyl coated handle for ease and operation. Used mostly in the mid west

T40

10" ALLIGATOR JAWS

11" UNIVERSAL PLIERS

11" universal pliers - widely used on farm fencing for removing staples on one side and as a hammer on the other side. There are two wire cutting edges and a wire puller in the center

T35A

11" UNIVERSAL PLIERS

CARRIAGE BOLT PLIERS (Gate Type Green --Field Type Brown/black)

These pliers are also called labor saver & are very easy to use.

Insert carriage bolt through the holes in the holes in the tension band or brace band, rest the round head part of the carriage bolt in the solid recessed or indented part of the end of the pliers. The carriage bolt goes through the open end of the pliers. Squeeze the pliers until the carriage bolt passes through the tension band or brace band, put nut on carriage bolt and tighten. Turn the nut until it touches the tension band or brace band. You do not need additional toll when using these pliers.

Gate model (green handle) ideal for use while stretching fabric to the gate frame.

Field model (brown handle) labor saver, one man operation for holding bolt in place.




T135 - FIELD-MODEL EACH	T130 - GATE-MODEL EACH

LINESMAN PLIERS

8" LINESMAN PLIERS - USED ON 11 GAUGE STEEL.

10" LINESMAN PLIERS- USED ON 9 AND 6 GAUGE STEEL.

T46

10" LINESMAN PLIERS

9" HOG PLIER

MALLEABLE IRON PLIER CAN BE USED ON 11 GAUGE OR 9 GAUGE STEEL WITH EASE

T40A	9” Hog Ring Plier

AUTOMATIC HOG RING PLIER

Do not break easily good for long run & frequent use.

Capacity - 25 rings per strip

Fasteners - 9 GA aluminum ring 09AL25

2500 per box

Automatic feed - no more loading loose rings. Rings always in position for next fastening.

Vinyl comfort grips - less fatigue, extended use. Big jobs or small

AHRG	Hog Ring Plier
AHRG25 (fastener)	2500 PCS/box

STRETCHING TOOL

FENCE STRETCHING TOOL

ONE HANDED OPERATION

HEAVY DUTY YET LIGHT WEIGHT

HOLD FENCE IN PLACE WHILE YOU WORK

CORROSION RESISTANCE PART W/ ALL METAL CONSTRUCTION

WORK FROM EITHER SIDE OF THE FENCE

KEEPS TENSION BAR RIGID

RS10	RATCHET STRETCHER	EACH

MAASDAM POWER PULL

MAASDAM POWER PULL - THIS IS CONSIDERED THE BEST POWER PULL ON THE FENCE MARKET TODAY. OVER THE YEARS WE HAVE SOLD ALL KINDS OF THEM, BUT OUR CUSTOMERS AND TRUCKS DRIVERS ALWAYS INSIST ON MAASDAM ONLY.

T170	1 TON MAASDAM POWER PULL (3/16" CABLE)
T171	2 TON MAASDAM POWER PULL (3/16" CABLE)
T195	1 TON MAASDAM POWER PULL
T172	REPLACEMENT CABLE 12' (1" WEB STRAP)
T196	REPLACEMENT STRAP 12'
T173	REPLACEMENT HOOK
T174	REPLACEMENT RATCHET
T175	REPLACEMENT HANDLE

WIRE GRIP

Used in conjunction with the power pull to stretch barbed wire or coil spring wire.

T110

WIRE GRIP

EACH

GIANT WIRE GRIP

Rated for 1500 LB capacity, but pulls even more... used along with MAASDAM POWER PULL

for stretching barbed wire, plain & coil spring.

T112

GIANT WIRE GRIP

RUBBER MULE

Made of first grade Rubber Polymers. Available in 4 lengths- 15” thru 41” plus 2 1/2” Hooks. Hook pivots with straps and is permanently locked on both ends.

CODE#	DESCRIPTION	EACH
T105	15” Rubber Mule
T106	21” Rubber Mule
T107	31” Rubber Mule
T108	41” Rubber Mule

FENCE FABRIC STRETCHER

Fence Stretcher - Heavy duty construction. The body is 3/8” steel 1 1/4” wide for the 24” and 2” for the 42” and 52” stretcher. Use with the pull jack to stretch Fabric from 3' to 8' by one man, thus becoming a big labor cost saver.

T85-24	24” Fence Stretcher
T95-42	42” Fence Stretcher
T100-52	52” Fence Stretcher
T100-69	69” Fence Stretcher

HAND STRETCHER

HAND STRETCHER - This hand stretcher is very useful for stretching gates and short stretches of fence. Always use two of them so as to stretch evenly.

CODE#	DESCRIPTION	EACH
T145	1 3/8” Hand Stretcher
T146	1 5/8” Hand Stretcher
T147	2” Hand Stretcher
T148	2 1/2” Hand Stretcher

HEAVY HAND STRETCHER

The Heavy Duty hand stretcher wraps itself around the pipe thus giving more leverage. Hot dipped Galvanized. Need 2 pieces to stretch properly.

CODE	DESCRIPTION	EACH
T301	1 5/8” Heavy Hand Stretcher
T302	2” Heavy Hand Stretcher
T303	2 1/2” Heavy Hand Stretcher
T304	3” Heavy Hand Stretcher
T305	4” Heavy Hand stretcher

WIRE STRETCHER

Used mostly for residential jobs in conjunction with the MAASDAM power pull

T115

Wire Stretcher

PULL JACK

This is one of the best stretching tool ever made. Can be used for stretching, lifting and aligning chain link fence. Made of Malleable Iron and Heat-treated components. Has a 1000 LB capacity. Fits up to 3 1/2” diameter pipe. The deluxe model has a 4' arm designed to stretch 4' chain link in one pull. Deluxe pull jack has a 42” rake.

CODE#	DESCRIPTION	EACH
T180	Pull Jack
T181	Pull Jack Deluxe
T182	Pull Jack Rebuilding Kit

THE VERSATILE GOLDENROD

Fence Stretcher - Splicer Here the stretcher is shown performing one of its most important functions- Splicing. Note how the hooks are taking up slack from both ends of the wire and holding them in place, so both hands are free to make a splice. The ends are held firmly in place until the tension is released.

T126

GOLDEN ROD

HAND STRETCHER

This tool stretches the barbed wire or coil spring drum tight with little effort.

T125

Wire stretcher

EASY STRETCH (FOR BARBED WIRE)

Easy stretch - barbed wire stretching tool cuts fencing time drastically

	ES10	Easy Stretch
	NS	Non Slide Bar	$

TURBO LEVEL

A unique tool used to raise the chain link to the proper height. Once secured your hands are free to install the ties.

Turbo level

CUTTING TOOLS

BAND CUTTER - Heat treated jaws; ideal tool for cutting the heavy straps holding the pipe, no need to ruin your telegraph bar.

T190

Band cutter

PIPE CUTTER We have been selling these pipe cutters since 1973 without any complaints.

T160	2 1/2” Pipe Cutter
T162	4” Pipe Cutter
T160A	2 1/2” Replacement Blade
T162A	4' Replacement Blade

COLLINS PIPE CUTTER

Replacement parts for Collins E-Z cutter available. Collins d ns cutter blade in stock.

CB10
Call for prices ON COMPLETE COLLINS MACHINE

BOLT CUTTER

Available in sizes from 8” to 36”. They are a very versatile tool - used to cut wire or rods up to 1/2” thick. Replacement jaws are available

CODE #	DESCRIPTION	EACH
T56	14” Bolt Cutter
T57	18” Bolt Cutter
T58	24” Bolt Cutter
T63	30” Bolt Cutter

MEASURING TOOLS

STEEL MEASURE

One of the very important tolls which we all are aware of... a must for worker on & off the field...

T291

25' X 1” Steel tape

FIBERGLASS TAPE

DO NOT BREAK EASILY GOOD FOR LONG RUN & FREQUENT USE

	T286	50' Fiberglass tape
	T287	100' Fiberglass tape

ROLATAPE MEASURING WHEEL

A precision recording counter computes measurements with efficiency. Scientifically calibrated wheels are rimmed with tough neoprene hard rubber to ensure solid traction.

Easy to use. Just walk with wheel on ground to measure.

Can measure just as easily around curves or over contours as on straight lines.

The measurements can be seen while you are walking & there is no need to wind & unwind... as in tapes..

T205	12” Measuring wheel
T210	4” Measuring wheel

MEASURING PROTRACTOR

T191	18" PROTRACTOR
T192	36" PROTRACTOR
T193	72" PROTRACTOR

NOTCHING TOOLS FOR PVC

NOTCHING TOOL used on 100% vinyl everlasting fences to make an elevation at the end of each rail prior to insertion into post. Jaws furnished with 18” bolt cutter. Notch is 3/4” wide.

	NT10	Notching Tool
	RNT10	Replacement Blade

NT9

MINI Notching Tool

$25.33

ECONO ARC-FIT HAND NOTCHER

To notch 1 3/8”, 1 5/8”, & 2” fence designation tubing. All hardened tool steel cutting members. Different punches for each size. Change over time less than 2 minutes. One tool complete & ready to use.

Hand Notcher

LOWBUCK NOTCHER

The Williams Lowbuck Notcher features patented upper and lower ram supports and heat-treated tool steel cutters for long life and smooth action. It includes cutters for each size...1 3/8”, 1 5/8”, 1 7/8”.

LN10

Lowbuck Notcher

PIPE NOTCHER

1400	Hand press
1401	Arc fit housing
1402	Assembly for 1 3/8” O.D. pipe
1403	Assembly for 1 5/8” O.D. pipe
1404	Assembly for 2” O.D. pipe
1406	Stand
1406	Assembly for 2 1/2” OD pipe

DELUXE HACK SAW
	T200	8” TO 12” Deluxe hack saw
	T202	Hack saw blade

DELUXE TWIST TOOL (plastic handle spring return) - with 2 1/2” twists per pull. This tool is designed to give maximum pull strength with minimal effort.
	RRTW10	Deluxe twist tool

TWIST TOOL (manual) - The original tying tool. Speed, ease of use, and economy make this tool our number one seller
	RRTW6	Twist Tool

BOW SAW We suggest that if you handle wood you should have one bow fence in each truck.
T100	Bow saw