NOTE: All GTO® transmitters and receivers are compatible with all GTO/PRO® operators as long as both the transmitter and the receiver are the same brand.

All GTO/PRO® and Linear™ brand of transmitters and receivers are compatible with all GTO/PRO® operators provided that BOTH the transmitter and the rreceiver are the same brand.

—Mini Keychain (RB709) —mini keychain with adjustable code settings.

—Single Button (RB741) — standard with all GTO gate operators.

—Dual Button (RB742) — 2 channels with adjustable code settings—visor clip.

—Triple Button (RB743) —3 channels with adjustable code settings—visor clip

All GTO/PRO® and Linear™ transmitters and receivers are compatible with all GTO/PRO® operators and accessories as long as BOTH the transmitter and the receiver are the same brand.

REPLACEMENT RECEIVER (AQ201) —with 10 foot of cable.

REPLACEMENT RECEIVER (AQ325) — with 25 foot of cable.

REPLACEMENT RECEIVER (AWQ350) — with 50 foot of cable.

REPLACEMENT RECEIVER (AWQ400) —with 100 foot of cable.

UNIVERSIAL RECEIVER (RB709) —universal programmable for multiple gates and/or garage doors.

GTO/PRO® WEATHERPROOF PROGRAMMABLE DIGITAL KEYPAD—F300

• Can be easily installed as a wired or wireless keypad for all GTO swing and slide gate operators, and as a wired keypad for the Bulldog® Pedestrian Gate Lock.

• It can be programmed to recognize fifteen different personal identification number (PIN) codes. Each code is face programmable with additional security features built in.

• Can also accommodate most garage doors and other gate openers. If used as a wired keypad – GTO low voltage wire (see RB509) will be required.

• Ideal for airports, hospitals,warehouses, office buildings, parking lots, commercial facilities

• Up to 480 programmable input codes for activating either or both relays

• Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal

• Keylock secures keypad to mounting backplate.

GTO/PRO® PUSH BUTTON CONTROL—(RB101) Unlighted doorbell button for remote entry or exit control. Connects directly to the control board using 16 gauge stranded, low voltage, direct burial wire RB509 (not included).

The exit wand is an electromagnetic sensor that detects metal mass in motion providing a 12 foot radius of detection that allows hands free exit from automatic gate operators. The sensitivity of the wand is adjustable for individual requirements.

The GTO Exit Wand is designed for residential, agricultural and commercial applications and comes with various lengths to suit your customers needs. It is compatible with most automatic gate operators utilizing single and dual gates.

The GTO Exit Wand has very low power consumption with a wide input voltage range that makes it ideal for battery applications. It is designed to reject line noise of 50 Hz or 60 Hz to improve its detection compatibilities near power lines.

EXIT WAND—(FM139) 50 ft. of multistrand, direct burial, low-voltage wire.

EXIT WAND—(FM140) 100 ft. of multistrand, direct burial, low-voltage wire.

EXIT WAND—(FM141) 150 ft. of multistrand, direct burial, low-voltage wire.